GSM alarm system, GPRS alarm system
China facory! NEW Business GSM+PSTN alarm security system
1.2Attentions before usage
Get approval from local police office before presetting the police phone number as the alarm phone number
Ensure the system is in the correct installation, then connect AC power supply with the panel
Only suitable for DC 12V 7AH sealed lead rechargeable storage battery, be cautious to connect red positive line with positive terminal (+), and black negative line with negative terminal(-). The incorrect connection will cause damage of main panel.
Rechargeable current ≤ 1.5A
Avoid metal parts or hand contact to the electronic parts on the circuit when install the lines.
Must use 2.7K resistor short unused wired zone
Mark wires to avoid miss-connection when using too many wired zones
Cut off all AC power supply, battery and telephone line before maintenance
Short JP1 when reset main panel
The 1.00MM copper-core wire from the keypad to alarm panel is up to 150 meters, 4 keypads can be connected in series
Note: After the programming being in progress to the host is finished, please spring with lead plane JP1 place to keep the jumper wire cap down batch away, to prevent others from carrying out operation on your host, and enhance the security of the host.
High speed digital communication, compatible ADEMCO4+2, CID digital communication protocol; Send alarm signal to alarm center.
With eight-way output module can be customized output: Linkage output; Remote control output (mainly USED IN linked with the monitoring, control home appliances. Lamp, exactly see 4.35)
Different programmable settings, such as alarm sounds, zone types, recording, monitoring, remote controlling, telephone number, phone line Check, and etc.
Compatible with wired and wireless function
1 group 6 bits primary passwords, 15 groups subsidiary setting passwords are available to improve security;
6 groups of phone number and 3 group alarm center phone number could be set. When the alarm activated, it could repeat dialing the numbers.
8 ARM modes: Exit ARM, boundary ARM, single zone ARM, delay ARM, remote ARM, compel ARM, remote ARM and preset time ARM.
6 DISARM modes: Single zone DISARM, keypad password DISARM, long distance DISARM, time DISARM, remote setting DISARM, DISARM when connecting alarm.
8 zone modes: Instant zone, delay zone, 24 hours zone, boundary zone, fire alarm zone, gas zone, check zone, and BY-PASS zone
Remote control function, external monitor, monitoring from long-distance.
Built-in voice module, 10~20seconds record, voice alarm function
Set the alarm delay time and siren yelp time
Search record of emergency
Remote controller can be used to set alarm, DIS-ALARM, emergency alarm and other operation.
Operate from keypad, easily and convenient.
Phone line malfunction indication function: System will alarm when phone line is cut off or short.
The alarm dialling is in priority
Backup DC 12V 7AH sealed lead rechargeable battery support work when AC power cut off
"Watch dog" function, to avoid system down.
Remark: Pull out the jumper head in JP1 of the main panel after finishing program for the main panel, which can prevent other person operate the main panel and improve security.
Standby Current: 80mA
Working Current: 300mA
Power Supply: DC 9-12 V
Operating Temperate: -10 ~ +40
GSM Frequency: 900/1800/1900 MHz
Receive Coding: ASK
Receive Frequency: 315/433MHz
Remote Control Distance: No obstacle 100m
Kits: 1 main panel, 1 wireless infrared (motion) detector, 1 wireless door magnetic detector, 1 siren, 2 remote controllers, 1 power supply, 1 manual
Villa, shop, office, hospital, school, library, bank, street lamp, billboard, farm, Orchard, fishpond, parking lot.